Help with jailbreaking and Cydia for iPhones, iPads, and iPod touches.

Pangu provides an iOS 9.0 untethered jailbreak. TaiG provides an iOS 8.4 and 8.3 untethered jailbreak.
Check @PanguTeam, @taig_jailbreak, @saurik, and /r/jailbreak for news and updates.
You can use Cydia Impactor if you need to un-jailbreak an 8.1-8.4 device without restoring.
Instructions for jailbreaking iOS 8.0-8.4.
Before asking a question, check Frequently Asked Questions to find quick answers!
How to fix some mysterious problems.

Need help on No Service and ICCID no sim on my 3gs 5.1.1 modem firmware 06.15.00 new BR week 46, 2009.....my 3gs was working fine using any sim or carrier on ios 4.1.1.....bt i upgraded it to ios5.1.1 and have already jailbroken it with redsn0w....ultrasn0w has been installed on it and its still not unlocked....i have tried downgrading the ipad baseband but it gives me error after running the black screen programing on phone and a long pleas wait message, then error...i don't know if its the week 46 is the problem as i heard week 40 - 45 are new bootroms and are fixed...but mine is 46..even newer...pls help me

This question is marked "community wiki".

asked 17 Jan '13, 04:38

louisred's gravatar image

louisred
11314


Sorry to hear you are having some troubles with your iPhone, I know how frustrating that can be.

Sounds like you may have a corrupted baseband and iOS version combination. Try downgrading your baseband to 05.13.04 using redsn0w. This should allow your device to read your SIM card once again. As long as you are using the original carrier (or if your device is factory unlocked) it should activate via iTunes. If you require an unlock you can jailbreak using redsn0w and unlock with ultrasn0w from Cydia on iOS 5.1.1 with baseband 05.13.04. If you have not activated with the original carrier sim first, and do not have one available to you, fix your hacktivation issues prior to unlocking using SAM installed from repo.bingner.com.

link

answered 17 Jan '13, 04:43

JuergenWest's gravatar image

JuergenWest ♦
12.1k383348

edited 17 Jan '13, 05:05

tnx guys...yes,i did not activate it with the original carrier sim at first, and its not available too...is repo.bingner.com a site or i'll have to add it to cydia's sources?

(17 Jan '13, 04:52) louisred louisred's gravatar image

It is a Cydia repo; add it to the sources

(17 Jan '13, 04:53) 0x56 ♦ 0x56's gravatar image

its saying "the indicator repository could not be found... :S

(17 Jan '13, 04:57) louisred louisred's gravatar image

ok..thanks...SAM is installed now...should i try downgrading ipad baseband now?

(17 Jan '13, 05:31) louisred louisred's gravatar image

:S how do i setup SAM....i'm soo confused

(17 Jan '13, 05:52) louisred louisred's gravatar image

The iPad baseband downgrade is the first thing you should have done, the steps should be done in the order prescribed above. SAM may not even be necessary per the instructions above.

(17 Jan '13, 16:16) JuergenWest ♦ JuergenWest's gravatar image

yea...i'v fixed it...i had to restore it again and jailbreak it again then checking the downgrade ipad baseband this time...so it downgraded and install cydia at the same time...then i installed ultrasn0w...now my sim working fine....but...i have another problem...the screen touches by itself...or when my finger is close to it...its freaking me out...

(23 Jan '13, 06:21) louisred louisred's gravatar image

Try the downgrade process with redsn0w again, sometimes it takes multiple attempts before it will work.

The device having a new bootrom will not affect the baseband downgrade; the only reason not to downgrade (does not apply in your case) would be if the device was produced after mid-year 2011 (serial number starting with XX134 or higher).

link

answered 17 Jan '13, 04:41

0x56's gravatar image

0x56 ♦
903149

edited 17 Jan '13, 04:49

Your answer: (please use the "add new comment" button unless you are actually answering the original question)
toggle preview

Markdown Basics

  • *italic* or _italic_
  • **bold** or __bold__
  • link:[text](http://url.com/ "Title")
  • image?![alt text](/path/img.jpg "Title")
  • numbered list: 1. Foo 2. Bar
  • to add a line break simply add two spaces to where you would like the new line to be.
  • basic HTML tags are also supported

Tags:

×94

Asked: 17 Jan '13, 04:38

Seen: 1,613 times

Last updated: 23 Jan '13, 06:21

JailbreakQA is by chpwn and comex.
About JailbreakQA. Powered by OSQA.