Help with jailbreaking and Cydia for iPhones, iPads, and iPod touches.

Pangu provides an iOS 9.0 untethered jailbreak. TaiG provides an iOS 8.4 and 8.3 untethered jailbreak.
Check @PanguTeam, @taig_jailbreak, @saurik, and /r/jailbreak for news and updates.
You can use Cydia Impactor if you need to un-jailbreak an 8.1-8.4 device without restoring.
Instructions for jailbreaking iOS 8.0-8.4.
Before asking a question, check Frequently Asked Questions to find quick answers!
How to fix some mysterious problems.

Anybody else having this issue?

asked 15 Feb '11, 18:40

mrat93's gravatar image

mrat93
31314

Were you previously unlocked? When you ran PwnageTool, did you select "Upgrade the Baseband"?

(15 Feb '11, 18:47) gomanski gomanski's gravatar image

Before, I was on stock 4.2.1, never jailbroken. And I believe that option was grayed out either way.

(15 Feb '11, 18:48) mrat93 mrat93's gravatar image

Hmm. Well, I just restored my iPhone4 with a PwnageTool 4.2 firmware, and not seeing that... I'd say reboot, and if that doesn't fix it, try again

(15 Feb '11, 18:51) gomanski gomanski's gravatar image

I think you're ahead of the curve here, might have to wait for a few more people to use PT4.2 and see their results.

(15 Feb '11, 18:51) Endareth Endareth's gravatar image

Restoring to stock FW in iTunes... First, error 1600, then error 1024 (I think?) Trying again...

(15 Feb '11, 18:52) mrat93 mrat93's gravatar image

I keep getting error 1013 trying to restore...

(15 Feb '11, 19:03) mrat93 mrat93's gravatar image

I am having the same problem, and I used Greenpois0n RC6.1. I have one bar and no carrier logo. For about 5 seconds every 5 minutes...the Rogers logo will show, and then disappears again.

iPhone 4 32GB (Factory Unlocked), iOS 4.2.1

(23 Feb '11, 14:46) relkorama relkorama's gravatar image

Just to follow up on my previous comment...a weird thing is happening. As soon as I start and run Cydia...my carrier logo reappears. As soon as I close Cydia, my carrier logo disappears.

(23 Feb '11, 14:49) relkorama relkorama's gravatar image

installing ultrasn0w seems to fix this problem. also updated a iphone 4 from 4.0 to 4.2.1 maintaining baseband, and got only one bar. Installed ultraSn0w and that brings back logo and 5 bars (i never have 5 bars here)

link

answered 19 Feb '11, 04:00

zolia's gravatar image

zolia
161

Error 1013 is generally the baseband update error. It generally means that the restore/update was ok, but not the baseband update. You should be able to use TinyUmbrella to kick it out of recovery mode and all should be back to normal.

link

answered 15 Feb '11, 19:10

Endareth's gravatar image

Endareth
6.7k232439

Just for a note, too, I ran PwnageTool 4.2, no TinyUmbrella running in the background, and my baseband was preserved with no 1013 error.

(15 Feb '11, 19:23) gomanski gomanski's gravatar image

When using a custom firmware from PwnagetTool or Sn0wbreeze, they usually don't do the baseband update (option is disabled in current version I think), so no need for TU, and no 1013 error.

(15 Feb '11, 19:24) Endareth Endareth's gravatar image
Your answer: (please use the "add new comment" button unless you are actually answering the original question)
toggle preview

Markdown Basics

  • *italic* or _italic_
  • **bold** or __bold__
  • link:[text](http://url.com/ "Title")
  • image?![alt text](/path/img.jpg "Title")
  • numbered list: 1. Foo 2. Bar
  • to add a line break simply add two spaces to where you would like the new line to be.
  • basic HTML tags are also supported

Tags:

Asked: 15 Feb '11, 18:40

Seen: 1,271 times

Last updated: 23 Feb '11, 14:49

Related questions

JailbreakQA is by chpwn and comex.
About JailbreakQA. Powered by OSQA.